Group News

Hydraulic Pump regular maintenance regulations

Release time 2017-03-23 15:04  
1. Daily inspection of the product fasteners, such as: screws and other loose , check the installation of piping interface, whether oil spills.

2. Check the cleaning of the oil seal. Often need to clean the oil seal, to prevent the impact of mechanical life.

3. Recommended for the first time after 500 hours of work, the replacement of hydraulic oil, hydraulic oil replacement maximum cycle of 2000 hours, with air filter maximum replacement cycle of 500 hours.

4. To optimize the service life of hydraulic components, replace the hydraulic oil and filter regularly. Hydraulic pollution is the main cause of damage to hydraulic components. Please keep the hydraulic oil clean for daily maintenance and repair.

5. Daily use should check the hydraulic tank oil level is to meet the requirements, while checking the hydraulic oil and the presence of abnormal odor. When the hydraulic oil contains water, the oil is cloudy or milky, or there is water droplets at the bottom of the tank. Oil stench, indicating that the hydraulic oil working temperature is too high. When the above situation occurs, please immediately replace the hydraulic oil, and identify the cause of the problem and solve. Daily attention to check the vehicle for leaks.

6. During commissioning and operation, the axial piston pump components must be filled with hydraulic oil and clean the air. After a long period of downtime, the need for oiling and exhaust operation, because the system may be through the hydraulic pipe drain.

7. Damage to the hydraulic components are fatal to ensure that the maintenance and repair of the working environment clean. Before starting maintenance or repair, thoroughly clean the pump or motor.

8. Regularly replace the system's hydraulic oil and filters according to the recommended standards to ensure efficient and safe operation of the system and replace the consumable parts on a regular basis.